Caractéristiques du produit
● Triple Eccentric Design: The stem and seat sealing surface are precisely offset to minimize friction and achieve reliable metal-to-metal sealing.
● Multi-Layer Seat Structure: Stainless steel and graphite composite sealing ensures tight shut-off and thermal resistance.
● High Temperature Resistance: Suitable for continuous operation up to 450°C (842°F).
● Compact Wafer Structure: Saves installation space and simplifies maintenance.
● Excellent Torque Transmission: The rigid disc-shaft connection ensures smooth operation and consistent sealing performance.
Avantages du produit
● Long Service Life: Minimal wear and robust structure ensure extended operation cycles.
● Tight Metal Seal: Zero leakage under high pressure and temperature conditions.
● Bidirectional Sealing: Reliable performance for both flow directions.
● Low Operating Torque: Reduced friction ensures energy-efficient actuation.
● High Reliability: Meets stringent European and American performance standards.
Gamme de tailles
● NPS 2″ – 48″ / DN50 – DN1200
Pressure Rating
● Class 150 / Class 300 / PN10 / PN16 / PN25
Normes
● Design Standard: EN 593 / API 609
● Test Standard: EN 12266 / API 598
● Flange Standard: EN 1092-2 / ASME B16.5
Applications industrielles
● Power generation and steam systems
● Petrochemical and refining industry
● Metallurgy and gas transmission pipelines
● Pulp, paper, and process control systems
● Environmental protection and energy projects
FAQ
1. What does “multi-layer” refer to?
The seat is built up in layers of stainless steel and graphite composite. This gives the metal-to-metal seal its tightness, while the graphite adds thermal resistance, which is why the valve can run at high temperatures.
2. Why does the disc leave the seat completely when it opens?
The three offsets are arranged so the disc swings out of contact with the seat as soon as it starts to open. Because it does not rub against the seat during travel, friction and wear stay minimal, which extends service life.
3. Does it matter which side the pressure comes from?
No. The valve seals in both directions, so you do not need to worry about which side the pressure is on when installing it.
5. Wafer or lug for my line?
A wafer body clamps between two flanges, which keeps the valve compact and light. If you need to bolt from one side for dead-end service, the Lug Type Double Eccentric Butterfly Valve is the better match. If you are weighing double against triple eccentric, our guide Zero Leakage Explained compares them.
Politique de confidentialité | Sitemap Copyright Tianjin Dingliu valve Industry Co., Ltd.