Product Features
● Concentric Resilient-Seated Design: The centered disc and shaft work with an elastomer seat to provide dependable shut-off for compatible media.
● Worm Gear Operation: Gear reduction lowers manual operating effort and provides smooth, controlled opening and closing.
● Wafer-Type Body: Compactly installed between two pipeline flanges, helping reduce installation space and system weight.
● Bidirectional Shut-Off: Suitable for isolating flow in either direction under the specified operating conditions.
● Valve Position Indication: The gearbox indicator provides a clear visual indication of the disc position.
● Controlled Disc Movement: The worm gear helps prevent sudden manual movement and allows the disc position to be adjusted gradually.
● Multiple Material Options: Body, disc, stem and seat materials can be selected according to the medium and project requirements.
● Common Flange Compatibility: Available for commonly used PN- and Class-rated flange systems according to the selected configuration.
Advantages
● Smooth manual operation with reduced operating effort
● Compact structure and lower installation weight
● Reliable resilient sealing for compatible media
● Mature and widely used construction
● Competitive cost for routine water and utility projects
● Flexible body, disc, stem and seat material combinations
● Convenient installation between matching pipeline flanges
● Suitable for distributors, replacement demand and general project supply
Final selection should be based on the medium, working pressure, temperature, flange standard, operating frequency and installation conditions.
Size Range
● NPS 2″–40″
● DN50–DN1000
Larger sizes and special dimensional requirements can be discussed with the factory. The gearbox shall be selected according to valve size and required operating torque.
Pressure Rating
● PN10 / PN16
● Class 150
PN and Class ratings are separate pressure and flange systems and shall not be treated as directly interchangeable. The applicable rating depends on valve size, material configuration, seat material and operating temperature.
Material Options
| Component | Common Material Options |
| Body | Cast iron / Ductile iron / Stainless steel |
| Disc | Coated ductile iron / CF8 (304) / CF8M (316) / C95800 aluminium bronze / Duplex stainless steel |
| Stem | Stainless steel 416 / 420 / 431 / 17-4PH (Type 630) or equivalent corrosion-resistant high-strength material |
| Seat | EPDM / NBR / FKM / PTFE / Silicone rubber |
| Operation | Worm gearbox with handwheel |
Material compatibility must be confirmed according to the medium, concentration, chloride content, working pressure, operating temperature, flow velocity and corrosion conditions. PTFE seating requires a product-specific construction review and should not be treated as identical to a conventional elastomer seat.
Standards
International Standards
● Design: API 609 Category A / EN 593 / MSS SP-67
● Face-to-Face Dimension: EN 558 Series 20 / API 609
● Inspection and Pressure Testing: API 598 / EN 12266-1
● Flange Compatibility: EN 1092-2 / ASME B16.5 / ASME B16.47
● Gearbox Mounting Interface: ISO 5211
Chinese Standards
● Design and Manufacture: GB/T 12238-2008
● Face-to-Face Dimension: GB/T 12221-2025
● Inspection and Pressure Testing: GB/T 13927-2022
International and Chinese standards represent alternative order or project requirements and are not automatically applied simultaneously. The applicable design, face-to-face, flange and testing standards shall be specified in the purchase order.
Industry Applications
● Municipal water supply and distribution
● Building water and HVAC systems
● Drainage and wastewater pipelines
● Agricultural irrigation
● Water treatment facilities
● Fire-water auxiliary pipelines, subject to project requirements
● Power-plant cooling-water systems
● General industrial water pipelines
● Seawater and mildly corrosive water services with suitable material selection
Suitability for drinking water, seawater, oil, gas, chemicals, abrasive media, vacuum service, high temperatures or fire-protection systems must be confirmed according to the complete material configuration and any required approvals.
Specifications are subject to improvement without prior notice. Final technical data shall be based on the approved quotation and certified drawing.
FAQs
1. Is this your standard series for routine water projects?
Yes. This is our Standard series wafer valve with a worm gearbox, set up as a cost-effective choice for isolation and basic flow control on routine water, drainage, HVAC and irrigation work. It is also how we supply distributors and general project replacements. If you need a configuration aimed at larger-size isolation, ask us for the worm gear wafer butterfly valve.
2. Can I get a cast iron body, or a PTFE seat?
Yes. Body options include cast iron, ductile iron and stainless steel. Seats are EPDM, NBR, FKM, PTFE or silicone rubber. If you need PTFE, we will review the construction first — it is not the same as a conventional elastomer seat. Tell us the medium, temperature and chloride content, and we’ll recommend the combination.
3. Are PN16 and Class 150 interchangeable? How do you select the gearbox?
No. PN and Class are separate pressure and flange systems, and we do not treat them as directly interchangeable. Tell us which system your pipeline uses. We select the gearbox according to the valve size and the required operating torque; send us both when you enquire.
Privacy Policy | SiteMap Copyright Tianjin Dingliu valve Industry Co., Ltd.